diy fidget spinner

How to make a diy fidget spinner

L.G Use precise words to give accurate detail.

S.O.S-precise nouns-include your materials

      -descriptive words in your steps

      -bossy verbs at the start of each           

       Sentence stick glue eg tell them what

        What to do.

Do you want a fidget spinner to play with and your mum says you're not allowed one?

Well i'm going to tell you how to make a fidget spinner.

 materials

6 bottle caps

1 schweser

1 pair of scissors

1 marker

1 screwdriver

Prep- plug in the hot glue gun

Step 1   ask a adult for help

First, get the 2 Bottle caps and the screwdriver.Get the screwdriver and one bottle cap.Start making a hole in the middle of the cap.Do the same on both sides.(remember make the hole quite big but not to big).

Step 2 ask an adult for help

Glue both of the bottle caps together with the glue gun. Don't glue the hole as this will not turn out successful.

Step 3

Grab the skewers and the scissors and cut the skewers down so that when you put it through the hole a little bit of the wooden stick sticks out get of the hole.

Step 4

Get the other 4 bottlecap and Marker. Place

A bottle cap around the base of the fidget. now get the marker and mark where the bottle cap sat.Mark it on the base.Grab a bottle cap place next to the marked area.mark the third bottle cap on the base and continue until there is three marked spots on the base.

Step 5

(Adult needed)

Get the glue gun.Grab the gun and glue the marked spots and place the 3 bottle caps on the glue and wait for it to dry.it forms to a fidget spinner.

Step 6

If you want glue counters with the glue gun and the middle do on both sides of the stick in the middle if you want.

 

If you have followed these steps you will have something to fidget with for 10 seconds.